BLOWOUT DEAL, FINAL SALE
The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time
Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.
New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.
Specifications
Details |
---|
Product code | RB952Ui-5ac2nD-TC |
Architecture | MIPSBE |
CPU | QCA9531 |
CPU core count | 1 |
CPU nominal frequency | 650 MHz |
Dimensions | 34 x 119 x 98mm |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
Powering
Details |
---|
Max Power consumption | 8W |
PoE in | Passive PoE |
PoE out | Passive PoE |
PoE in input Voltage | 10-28 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 10-28 V |
Wireless
Details |
---|
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 2 |
Wireless 2.4 GHz chip model | QCA9531 |
Wireless 5 GHz number of chains | 1 |
Wireless 5 GHz standards | 802.11ac |
Antenna gain dBi for 5 GHz | 2 |
Wireless 5 GHz chip model | QCA-9887 |
Ethernet
Details |
---|
10/100 Ethernet ports | 5 |
Peripherals
Details |
---|
Number of USB ports | 1 |
USB Power Reset | Yes |
USB slot type | USB type A |
Wireless specifications
2.4 GHz | Transmit (dBm) | Receive Sensitivity |
---|
1MBit/s | 22 | -96 |
11MBit/s | 22 | -89 |
6MBit/s | 20 | -93 |
54MBit/s | 18 | -74 |
MCS0 | 20 | -93 |
MCS7 | 16 | -71 |
5 GHz | Transmit (dBm) | Receive Sensitivity |
---|
6MBit/s | 23 | -93 |
54MBit/s | 20 | -75 |
MCS0 | 23 | -93 |
MCS7 | 19 | -71 |
MCS9 | 16 | -63 |
Ethernet test results
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results