Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface
Offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot.
95% line-mode efficiency offers reduced heat emissions and operating costs.
Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions.
Includes PowerAlert monitoring software and complete cabling.
Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.
Field-replaceable, hot-swappable battery modules.
Features:
- Tripp Lite SMART1500RM2U line interactive 2U rack/tower UPS with 1500VA / 1.5kVA / 1350W capacity
- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 147V
- NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks
- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
- High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions
- Internal batteries offer 13 minutes at 50% load (675W) and 4.5 minutes at 100% load (1350W)
- Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment
- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
- LCD interface also supports a number of advanced user setup and operating preferences
- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation;
- Optional 2-9USTAND enables tower placement
- Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
- Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
Package Contents:
- SMART1500RM2U UPS System
- PowerAlert software with USB, Serial & EPO cabling
- 4 post rackmount installation kit
- Instruction manual
Specifications:
Output
| Output Volt Amp Capacity (VA) | 1500 |
|---|
| Output Capacity (kVA) | 1.5 |
|---|
| Output Watt Capacity | 1350 W |
|---|
| Output kW Capacity | 1.35 |
|---|
| Output Power Factor | 0.9 |
|---|
| Nominal Output Voltage | 120V |
|---|
| Frequency Compatibility | 60 Hz |
|---|
| Output Voltage Regulation (Line Mode) | −21%, +8% |
|---|
| Output Voltage Regulation (Battery Mode) | ±5% |
|---|
| UPS Output Receptacles | 8 × 5‑15R |
|---|
| Controllable Load Banks | Two switchable dual‑outlet 5‑15R banks |
|---|
| Output AC Waveform (AC Mode) | Sine wave |
|---|
| Output AC Waveform (Battery Mode) | Pure sine wave |
|---|
Input
| Rated Input Current (Max Load) | 12 A |
|---|
| Nominal Input Voltage | 120V AC |
|---|
| UPS Input Connection Type | 5‑15P |
|---|
| Input Circuit Breaker | 15 A |
|---|
| Input Cord Length | 10 ft (3 m) |
|---|
| Recommended Electrical Service | 15A 120V |
|---|
Battery
| Full Load Runtime | 4.5 min (1350 W) |
|---|
| Half Load Runtime | 13 min (675 W) |
|---|
| DC System Voltage | 36 VDC |
|---|
| Battery Recharge Rate | < 4.5 hours (10% to 90%) |
|---|
| Replacement Battery Cartridge | RBC93‑2U |
|---|
| Battery Access | Front panel access door |
|---|
| Battery Replacement | Hot‑swappable, user‑replaceable |
|---|
Voltage Regulation
| Voltage Regulation Description | AVR maintains operation with input voltage range of 83–147 V |
|---|
| Overvoltage Correction | 128–147 V reduced by 12% |
|---|
| Undervoltage Correction | 83–107 V boosted by 14% |
|---|
LEDs, Alarms & Switches
| Front Panel Display | LCD for UPS status, site power data, configuration options |
|---|
| Alarms | Audible alarm for startup, power failure, low battery, overload, UPS fault, remote shutdown |
|---|
| Alarm Cancel Operation | Temporary silence via alarm‑cancel; silent mode configurable |
|---|
| Switches | 3 × pushbuttons (Power ON/OFF, MODE, MUTE/ENTER) |
|---|
Surge / Noise Suppression
| AC Suppression Joule Rating | 570 |
|---|
| AC Suppression Response Time | Instantaneous |
|---|
| EMI / RFI Noise Suppression | Yes |
|---|
Physical
| Primary Form Factor | Rackmount |
|---|
| Supported Installations (Included) | 4‑post 19″ rackmount |
|---|
| Supported Installations (Optional) | 2‑post rackmount, wall mount, tower |
|---|
| Rackmount Dimensions (H × W × D) | 3.5 × 17.5 × 13.45 in (8.9 × 44.4 × 34.2 cm) |
|---|
| Rack Space Height | 2U |
|---|
| Secondary Form Factor | Tower (requires 2‑9USTAND) |
|---|
| Weight | 46.5 lb (21.1 kg) |
|---|
| Shipping Dimensions (H × W × D) | 9 × 24 × 20.2 in (22.9 × 61 × 51.4 cm) |
|---|
| Shipping Weight | 57.6 lb (26.2 kg) |
|---|
| Housing Material | Steel |
|---|
| Cooling Method | Fan |
|---|
Environmental
| Operating Temperature | 0–40°C (32–104°F) |
|---|
| Storage Temperature | −15–50°C (5–122°F) |
|---|
| Relative Humidity | 0–95% non‑condensing |
|---|
| Heat Output (AC Mode, Full Load) | 267 BTU/hr |
|---|
Communications
| Communications Interface | USB; DB9 Serial; EPO; SNMP/Web slot |
|---|
| Network Monitoring | Detailed UPS and site power monitoring |
|---|
| PowerAlert Software | Included |
|---|
| Communications Cables | USB and DB9 included |
|---|
| WatchDog Compatibility | Supports watchdog, OS restart, hard‑reboot options |
|---|
Line / Battery Transfer
| Transfer Time | 2–4 ms |
|---|
| Low Voltage Transfer Point | 83 V |
|---|
| High Voltage Transfer Point | 147 V |
|---|
Special Features
| Grounding Lug | Rear panel grounding lug |
|---|
| Cold Start | Supported |
|---|
| High Availability | Hot‑swappable batteries |
|---|
| Green / High Efficiency | >95% efficiency; individually controllable load banks |
|---|
Certifications & Warranty
| Certifications | UL1778 (USA); CSA (Canada); NOM (Mexico); FCC Part 15 Class B |
|---|
| Warranty (Worldwide) | 2 years (3 years with registration) |
|---|
| Connected Equipment Insurance | $250,000 (U.S., Canada & Puerto Rico) |
|---|