UBIQUITI DOOR HUB MINI

Ubiquiti Line
- UniFi
- Door Access

Get notified when back in stock

Part#: Not Specified

Manufacturer SKU: Not Specified

Brand: Ubiquiti Inc

Warranty: 1-year Lin Haw warranty

Compact Access Control Hub for a single door.

ONLINE QUICK INSTALLATION GUIDE

Specifications:

Dimensions	113 x 66 x 27.6 mm (4.4 x 2.6 x 1.1")
Supported Doors	1
Maximum User Count	3,000
Input Terminals	(1) Door exit request (1) Door position
Power Method	PoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
NDAA Compliant	✓
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
Weight	190 g (6.7 oz)
Enclosure Material	Polycarbonate, metal
Mounting	DIN-rail (Included)
Dry Output Relay	30V DC, 1A
Wet Output Relay	12V DC, 1A
Indoor and Outdoor Use	Indoor only
Ambient Operating Temperature	0 to 40° C (32 to 104° F)
Ambient Operating Humidity	5 to 90% noncondensing
Networking Interface	(3) GbE RJ45 ports
PoE Interface	(1) PoE++ input, 50V DC, 1A (2) PoE+ outputs, 50V DC, 30W per port (Max 45W aggregated)
Max. Power Consumption	19W (Without PoE output) 50W (With PoE output)
LEDs	W/B
Buttons	(1) Factory reset (1) Dry/Wet switch
Recommended Max. Cable Length	UA-Lock-Electric (400mA) 24 AWG: 25 m (82 ft) 22 AWG: 42 m (138 ft) 20 AWG: 66 m (217 ft) 18 AWG UACC-Cable-DoorLockRelay: 100 m (328 ft) UA-Lock-Magnetic-540kg (500mA) 24 AWG: 12 m (39 ft) 22 AWG: 20 m (66 ft) 20 AWG: 30 m (98 ft) 18 AWG UACC-Cable-DoorLockRelay: 46 m (151 ft) UA-Lock-Magnetic-270kg (800mA) 24 AWG: 12 m (39 ft) 22 AWG: 20 m (66 ft) 20 AWG: 30 m (98 ft) 18 AWG UACC-Cable-DoorLockRelay: 46 m (151 ft) Other locks (1A) 24 AWG: 9 m (30 ft) 22 AWG: 15 m (49 ft) 20 AWG: 24 m (79 ft) 18 AWG UACC-Cable-DoorLockRelay: 36 m (118 ft)
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document Number / Revision	UA-Hub-Door-Mini, V01
Management Application	Access
Software Information	The software version can be checked at https://unifi.ui.com