THIS UNIT IS AN EXTRA RECEIVER FOR VE-H, YOU ONLY NEED IT IF YOU HAVE MULTIPLE OUTPUTS IN YOUR APPLICATION.

 HDMI Extender over Ethernet or Single Cat 5 / Cat 5e / Cat 6 / RJ45 UTP network cable - BALUN - 1080p Full HD

The VE-H HDMI EXTENDER over UTP cable / with powerful function of transmit over Ethernet uses one CAT5/6 cable to extend the HDTV display up to 120 meters for full 1080p signal, or by Ethernet. HDMI EXTENDER over UPT cable / with powerful function of transmit over Ethernet is not only breaking the limitations of the HDMI cable transmission length, but also has more flexibility and convenience in cable construction. HDMI EXTENDER over UPT cable / with powerful function of transmit over Ethernet offers solutions for residential consumers: HDTV retailers and show site, HDTV, STB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, schools and corporate training environments.

This hardware version (3.0) is not cross compatible with other versions (4.0, 2.0)

Use only with other 3.0 extenders 

Features: 

• The VE-H HDMI over Ethernet Extender supports full HDMI resolutions, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
  
• One piece of CAT5/6 cables can substitute HDMI cables to achieve long distance transmission
  
• Follows the Standard of IEEE-568B and Supports uncompressed 2 channel audio such as LPCM
  
• 3 modes of transmission:
  
• • 1) Connect the transmitter and the receiver directly by CAT5/6 cable: 120 meters by CAT6 cable, 100 meters by CAT5e cable, and 80 meters by CAT5 cable
    
  • 2) Transmit HDMI signal over Ethernet, by connecting the transmitter to the Ethernet by RJ45 port and connecting HDMI source in one room; and connecting the receiver to the same Ethernet by RJ45 port and connecting HDMI display in another room;
    
  • 3) Uses IP switches for extension and distribution.  Avoid mixing with other IP equipment.
    
• Cable runs can be extended another 100m by adding a Gigabit Ethernet switch
  
• Maximum 3 layers of Ethernet switches could be passed through
  
• Is capable of supporting DVI equipment when used with a HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components.

THIS UNIT IS AN EXTRA RECEIVER FOR VE-H, YOU ONLY NEED IT IF YOU HAVE MULTIPLE OUTPUTS IN YOUR APPLICATION.

WILL NOT WORK WITH VE-HDMI.

200ms or 130ms delay